Ductless Mini-Splits "It's all we do"
Looking for the best ductless mini-split AC installation performed by an expert installer? Welcome to "Advanced Ductless"
Looking for the best ductless mini-split AC installation performed by an expert installer? Welcome to "Advanced Ductless"
Mini-Splits cost less to operate than traditional ducted forced-air technology. They have the highest efficiency and SEER ratings in the industry. Combine that with their variable-speed operation and zoning capabilities, and now you have an AC system that keeps you more comfortable in your space for a lot less money every month.
Ductless Mini-Splits allow for great zoning opportunities. They are capable of between 1-8 individually operated zones connected to a single outdoor unit. Traditional forced-air systems use one thermostat for the entire house. Ductless true zoning leads to greater savings every month because you're only cooling or heating the rooms you ne
Ductless Mini-Splits allow for great zoning opportunities. They are capable of between 1-8 individually operated zones connected to a single outdoor unit. Traditional forced-air systems use one thermostat for the entire house. Ductless true zoning leads to greater savings every month because you're only cooling or heating the rooms you need too. No more wasting money to cool or heat areas you're not using.
Ductless Mini-Splits can be used almost anywhere. They can deliver heating & cooling to nearly any space with up to 5 different indoor air handler options. With the use of wall mounted units, ceiling cassettes, plus floor mounted and ducted versions, the design flexibility is second to none.
With use of mini-splits the answer is usually "Yeah, we can do that!"
The slim-line outdoor units are so quiet they are undetectable to the human ear!
Lol. Just kidding, but wow are they quiet. They have the lowest noise levels of any style of outdoor AC units being manufactured today. No more AC start ups that sounds like a wrench got thrown at the wall when the AC turns on. Slim-line side discharge units are "Whisper Quiet"
Consider the cost of replacing your existing AC system with the same ducted, forced-air style equipment, but newer. The average installed cost for a standard-quality 2-3 ton AC system is between $6,000 and $9,000. And, that's just for the basic equipment.
Additionally, you still have another significant problem to address: old, dirty, leaky, and inefficient ductwork.
Your ductwork is one of the biggest energy wasters in your home. Much of the money you spend every month to cool your space is being wasted in the attic or crawl space through improperly installed and sealed ductwork. Old, leaky, dirty, and inefficient supply and return air ductwork can be costing you a lot of money each month.
The average cost to replace old ductwork can easily be $600–$900 per duct.
When you consider the cost of fixing the huge problem of leaky ductwork (in most Florida homes, it's almost impossible to properly seal or replace the ductwork in an existing home), and add the cost of upgrading to a high-efficiency AC system, you can easily be in the $10,000–$20,000 range to upgrade your entire home to a high-efficiency AC system.
So, for far less money than you would spend replacing or upgrading your existing older AC system, you could upgrade to the most energy-efficient equipment being installed today—"Ductless Mini-Splits." When you add the benefits of zoning and individual temperature control in each area, along with all the other advantages that ductless mini-splits have to offer, it’s hard not to consider upgrading to this amazing technology.
Ductless Mini-Splits are not the answer to all cooling and heating needs. But if there is a way to upgrade your space, home, or office to this innovative technology, then we can figure it out. All we do is “Ductless Mini-Splits,” and we do them really well!
EXPERIENCE
We have over 20 years of daily experience in the HVAC industry with thousands of successful ductless mini-split AC installations. I have ductless mini-split AC installation experience that very few can compete with. Choose quality you can see and experience you can trust.
QUALITY
I'm a FREAK for quality. We cut no corners and use premium top-of-the-line installation materials and products, ensuring your new AC system will work for many years with trouble-free operation.
VALUE
We install quality products for the best prices. No crazy sale prices discounted off of super high jacked-up retail prices. We give exceptional pricing, value, and quality every time - the first time.
“Nobody does it better for less”
WE ACTUALLY CARE
We provide top quality installations for a less than average cost. We are incredibly clean, fast, and pay close attention to details. We treat every job like it’s the only one that matters.
Wall mounted units are the most common and least expensive of all the options. Great for most existing homes or businesses and any new construction or remodel.
Available BTU options
7,000 / 9,000 / 12,000
15,000 / 18,000 / 24,000
(Larger BTU's available if needed)
4-Way Cassettes are installed at the ceiling, recessing up into the attic space. Only the louvered grille is exposed, sitting flush with the ceiling, and blowing air in 4 directions.
Great for any type of new construction/remodel and can, in many situations, be installed into an existing home or business.
Available BTU options
9,000 / 12,000 / 15,000 / 18,000
(Larger BTU's available if needed)
Installed much like the 4-Way Cassette, the 1-Way Cassettes are designed to be installed in the ceiling at the end of a room or area and blow air down the length of the space. And, being less than 8" tall, they can be installed between two floors and mounted between two floor joist.
Great for any type of new construction, remodel, or business.
Available BTU options
9,000 / 12,000 / 18,000
Floor mounted units are designed to sit on or near the floor. Great for any place with crawl space access, manufactured homes, or any scenario where you need to install something low in the room. Great for most existing homes or businesses and any new construction or remodel.
Available BTU options
9,000 / 12,000 / 15,000 / 18,000
Concealed ducted units are designed to act just like traditional ducted systems. However, they are not designed to move large volumes of air. They are normally used to supply air to multiple rooms/areas off of one individual thermostat. They are not as commonly used, but in the right situation where a forced-air style system is needed and
Concealed ducted units are designed to act just like traditional ducted systems. However, they are not designed to move large volumes of air. They are normally used to supply air to multiple rooms/areas off of one individual thermostat. They are not as commonly used, but in the right situation where a forced-air style system is needed and there is not a lot of height to work with, these can be game changers.
Great for places that have room for a smaller ducted style forced air system. They also work awesome in many business/ commercial applications, new construction and remodels.
Available BTU options
9,000 / 12,000
15,000 / 18,000 / 24,000
(Larger BTU's available if needed)
"Whisper Quiet" and slim line. These units are the quietest and have the smallest footprint of any AC equipment you can have installed. Their small profile and light weight allow for endless installation opportunities.
Units can be capable of operating from 1-8 individual indoor air-handlers.
BTU options are practically unlimited!
Hello, my name is Joe Schiavone, AKA "Joe Ductless". I began in the HVAC business over 20 years ago in 2004 when I became an estimator for a larger HVAC company in the Pacific Northwest. I soon became the head estimator, second to the owner, and was quickly involved in everything HVAC. After being thrown into the HVAC industry I quickly gained extensive knowledge around everything relating to the HVAC world. This included Geo-Thermal, Radiant in-Floor Heating, Forced-Air Furnaces, Traditional Ducted AC & Heat Pump Systems, Water Heaters, Tankless Water Heaters, Fireplaces, all types of Mechanical Ventilation, and of course, “Ductless Mini-Splits.”
In 2014 I decided to dedicate my career to the great benefits that “Ductless Mini-Split” systems had to offer. Since then, I have been installing ductless mini-splits in almost every kind of building you can imagine that has 4 walls and a roof. I have installed mini-splits in large 10,000 square foot homes with 14 separate zones, to thousands of new construction homes, condo’s, duplex’s, existing homes, offices, commercial buildings/businesses, schools, banks, restaurants, dog kennels, etc……(I could keep going).
In the ductless mini-split world I have installation experience and knowledge that very few can compete with. We provide the highest quality installations with a level of detail and craftsmanship that are not commonly seen anymore. We are clean, precise, and very aware of the customer’s needs and expectation’s. Go with quality you can see and craftsmanship you can trust.
Thank you for reading this, and I hope we exceed your expectations if you choose us to help you with your next ductless mini-split project.
Ductless Mini-Splits are not the answer to all cooling/heating needs. But, if there is a way to upgrade your space, home, or office to this amazing technology, then we can figure it out. All we do is “Ductless Mini-Splits,” and we do them really well!
We stay in constant communication with our customers until the job is done. To get a free quote, or if you have questions or special requests, just drop us a line.
Open today | 09:00 am – 05:00 pm |
Copyright ©2013 - 2025 Advanced Ductless - All Rights Reserved.
Powered by Cool Comfort